Must Bikes Have Stands On The Left Side?(Read Guide)


Clipless Pedals

Must Bikes Have Stands On The Left Side?

The greatest reason behind bikes having stands on the left emanates from the drive set on the right.

You cannot have the drive set on the same side as the stand, so the stand goes to the left. So you may know, the bicycle was a British invention.

Consequently, it was meant to be ridden on the left on roads with kerbs and pavements.

Dismounting or mounting the bike from the kerb or pushing the bike works out a lot better with the stand on the left and chainset on the right.

The stand on the left makes it safe so that the stand does not damage the chainset should make the bike fall over.

And since placing gears on the opposite side of the kerb made more sense from the beginning, it’s only natural to expect the stand on the left.

As I have insinuated, the stand’s location has everything to do with the location of a drive set.

And drivetrains are rooted in the premise that rotating clockwise tightens bolts, etc., dates back to the first “safety bicycles” of the 19th century.

Is It OK To Put A Kickstand On A Mountain Bike?

It depends. There are two opinions regarding the use of kickstands on mountain bikes. I think this comes from the folks who have too much time on their hands.

But if you want to use or not use a kickstand on your mountain bike, the decision is entirely yours to make.

But there are pros and cons for either way you choose to go. I think putting a kickstand on a mountain bike is okay.

If you have a kickstand on your mountain bike, you have less to worry about even when your bike is not lying flat on the ground.

Since no one can trip over your bike when it’s standing up. Still, it’s not hard to load your bike when standing up.  

The Kickstand on your mountain bike comes in handy in making it easier to carry out simple maintenance tasks.

Again, a kickstand is of great use when cleaning the bike down at the end of your ride.

While there are pros to having a kickstand on a mountain bike, there are cons. For instance, they add extra weight since anything you add to a bike affects the weight.

Fortunately, the weight might not be noticeable. Again, a kickstand can catch on to objects, although unlikely.

Do GT Bikes Have Kickstands?

Not always. Kickstands were a staple component of any new bike some years back, not anymore.

Indeed, kickstands are not among bike components regularly shipped these days. So, if you have recently purchased a bike, it might not have a kickstand to help prop it up.

But leisure bikes have continued using kickstands; this feature is becoming less common on mountain and road bikes.

When it comes to GT bikes having or not having kickstands.

Note that kickstands are made of durable aluminum alloy material featuring a non-slip rubber foot design that makes it stable and safe and an adjustable height.  

It’s worth noting that a kickstand comes in handy in conveniently parking your GT bicycle.

Furthermore, it’s not hard to install the Kickstand as it comes with all the necessary installation tools for that purpose.

And a kickstand will make it easier to park your bike in a store.

How Do I Choose A Bike Kickstand?

To choose the right Kickstand for your bike, you will need to find out what size kickstand you need.

There are differently-sized kickstands, and you do not want to get it all wrong when selecting a kickstand for your bike.

So you want to take your weight on your bike and record the measurement.

To do this, hold the bike along the top tube and try to keep it perfectly centered as you weigh yourself with your bike, also recording the measurement.

Must Bikes Have Stands On The Left Side?

Proceed to subtract Step 1’s weight from Step 2’s weight. The result is your bike’s weight. Take note of the number as kickstands are meant to hold specific amounts of weight.

Therefore, this weight will be helpful when choosing a kickstand for your bike.

If you are not sure of your bike’s frame size, you will need to measure it. Knowing your frame size, you will have a lesser scope of selection.

Lastly, hold your bike on hard surfaces to lean slightly to the left. Measure from the bottom bracket’s center down to the floor.

This measurement happens to be the shortest Kickstand you will be buying.

Are All Kickstands The Same?

No, there is a vast difference among kickstands. These are designed with different sizes for different frame sizes and different bike brands.

A BMX kickstand might not fit an MTB bike and vice versa. So, as you look for a kickstand, you will need to exercise great caution. Again, kickstands come in different heights.

And yes, some will be lightweight, or sturdy, or even adjustable that have rubber feet. These are among the best kickstands to buy today.

It’s vital to buy a kickstand with a proven reputation for reliability and durability.

What Length Kickstand Do I Need?

Although kickstands are rarely standard equipment on new bicycles, their usefulness will make you want to get one.

If you have ever watched your bike fall over when you try leaning it against a tree or a wall, you might have thought of installing a kickstand.

And installation of a kickstand calls for selecting the right size of the Kickstand you need. So you will want to know your frame size as bikes have different frame sizes.

Measure the frame size as discussed earlier in this article. Once you know your frame size, getting the correct length of the Kickstand is easy.

This is because the length depends on the frame size.  Indeed, some kickstands are designed for smaller frames, and some are meant for larger frames.

You need to hold the bike leaning slightly to the left and measure the bottom bracket’s center down to the floor.

Since the measurements need to be in centimetres, you will need to convert them into inches by dividing the number of centimetres by 2.54.

Why Do Some Dirt Bikes Not Have Kickstands?

Usually, most dirt bikes do not have kickstands, especially the very pricey ones.

Most dirt bike riders feel that a kickstand makes them vulnerable to getting caught up in vegetation as they ride.

Indeed, some riders will laugh off kickstands, considering them as impractical dirt bike dress-up accessories. They equate it to ribbons on your handlebars.

Still, weight saving is a great determinant in not having kickstands on dirt bikes. While speed and lightweight are everything in a dirt bike, heavier bikes make for a slower rider.

Still, other riders hate kickstands due to the annoying rattling sounds they make. Consequently, motocross riders are better off avoiding them.

But the truth is that dirt bikes are heavy enough so that any weight reduction would be appreciated.

On the other hand, adding weight like the Kickstand will be felt, and the ride significantly affected.

Any dirt bike rider will want to shave a few pounds off their bike, and eliminating a kickstand is one sure way to do this.

Another reason a kickstand is avoided is that they are not very secure in supporting a bike.

How Do You Install A Dirt Bike Kickstand?

Since you can’t ride your mountain bike all the time, you will need to park it at times. And a kickstand comes in handy in this.

Installing a kickstand will involve picking your Kickstand. Ensure that you pick the correct Kickstand for your bike since kickstands are different.

And this, you will need to choose the correct position of the Kickstand for maximum clearance.

If the Kickstand is not correctly positioned, it will not have sufficient clearance, so it will not work well. Connect the bolt and tighten up the bolt using a box-end wrench.

After this, it will be time to give the Kickstand a try.

There will be minimal challenges installing your Kickstand on your mountain bike from the above steps. You can do this in less than an hour or so.  

How Do You Put A Kickstand Spring On A Dirt Bike?

Now, the “problem” with a dirt bike kickstand springs is that it is beefy.

– It needs to be to support the Kickstand’s weight and hold it tight against the body of the frame as you ride down the road. 

It’s not easy to stretch a dirt bike kickstand spring by hand or use a pair of needle-nose pliers. Indeed, it’s difficult to nearly impossible.

I tried this on Monday night, and on Saturday morning, my hand was still sore.

The easiest way to hack this otherwise task is to get a pile of washers or small coins.  After this, one end of your kickstand spring needs to be looped around something.

Proceed to bend the spring to the left. There will be gaps that begin to form. Insert a coin firmly into the space. 

Repeat the procedure by turning the spring opposite and installing a coin on the left. This needs to be repeated as much as you can.

This will give you an extended spring, and if you did a good job inserting the coins, you might not need to stretch the spring any further. You will only need to install it then.

Does Having A Kickstand Weaken The Bike Frame?

No, A kickstand will not weaken your bike frame. Indeed, this is a myth that kickstands weaken a bike frame. As to where it originated, I have got no idea at all.

You know how myths can take root from nowhere and get stronger with time.

And people not getting time to scrutinize some assertions whose root is in myths, it only helps in their propagation over generations.

Bike GPS Computers

While it’s true that putting a weld or a bolt onto the bike frame could feasibly weaken it.

There lacks any evidence that attaching a kickstand to a bike is a bad thing that the frame should not be taking.

I would see much reasoning if it argued that you would get wind resistance when riding your bike, which has a kickstand.

It would be expected that the bike will consequently slow you down. Luckily not many people are too keen on getting an extra 0.25 mph out of their biking.

So they will not worry about the wind resistance.

Can You Put The Kickstand on The Right Side of the Bike?

Yes, you can install a kickstand on the right. But you wouldn’t do it unless the sprocket and the chains are on the left side.

Kickstands are usually on the left of bikes for a reason. There are gears to think about, which occupy the right-hand side of your bike.

However, as it turns out, some people would want to install or know if it is possible to install a kickstand on the tight.

There are benefits associated with having your Kickstand on the left; there is no doubt about that. For instance, I have used my bike for eight years now.

Recently, I noticed that my left leg is somehow stronger as it now provides better balance in yoga.

If you were to install the standard Kickstand on the right, since it mounts behind the bottom bracket, the chainring on the right would interfere with such deployment.

All the same, there are scores of European Trials bikes with sprockets and chains on the left side. Therefore, they have the Kickstand on the right side today.

Still, other bikes made in Spain have the chain and sprocket on the left, and the kickstand goes to the right.

Conclusion

Bikes have stands on the left because of the chain rings and the sprockets.

These are on the right, and because installing the stand on the same side would interfere with their functioning, the stands automatically go to the left.

tawkboard

We're here to help you find the Best Bike Guides for your bike and lifestyle. Honest reviews, tricks and guides to help you find the best Bicycles and gears in the market. We compare the top products in different categories to give you the most reliable purchasing advice. Our goal is to make it easy for you to pick the best products and be confident in your decision.

Recent Posts