Maytag oven Troubleshooting Tips 2020

oven is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to We may earn a commission when you buy through links on our site at no extra cost to you. Here is our Affiliate disclosure page

Maytag oven Troubleshooting Tips 2020

Ovens have become the heart of every kitchen. Electric ovens always deliver results in a shorter time than anyone expects.

The new Maytag Gemini Double Oven Electric Range is among the most reliable electric ovens that you can use at your home.

The ovens offer you seamless baking options, and you get to enjoy better meals with time.

Besides, ovens are unique as they are among the few that can fit in the 30-inch box that is specially designed for your ovens in the kitchen.

It is, however, crucial to note that your Oven may malfunction if you fail to handle it with care.

READ ALSO: Top Best 10 UV Sterilizers for Aquariums

 Besides, it may also fail to respond to your demands as a result of other issues even when you maintain it accordingly.

If you experience problems with your electric Oven, worry no more as this  guide shows you how to maytag gemini double oven troubleshooting.

The Oven does not broil your food efficiently, and it smokes

If your food keeps smoking and it does not grill as expected, that suggests problems in your Oven. You can check the problem area by opening your oven door.

If the food is closer to the element than usual, this would be the cause of smoking. Be sure to move it away and position it in the right place.

Additionally, incorrect use of aluminum foil can make your food fail to bake effectively.

It is not recommended to use aluminum foils in your Oven as they are dangerous, and they can melt in the Oven when there is too much heat, and this ends up damaging the Oven permanently.

If you choose to use the aluminum foil to hold your food during baking, ensure that you spread it in the entire bottom without leaving space.

Failure to spread it accordingly makes it bake your food unevenly, and this leads to some food completing to bake while some parts remain still raw.

Your electric oven door is closed

When using a Maytag Gemini Double Oven Electric Range, you should leave the electric door opener.

Electric ovens tend to absorb cooler air from your kitchen whenever they are running. If you close the oven door, it makes it difficult for the device to absorb the air to cool itself.

Lack of air inside an electric oven leads to uneven temperatures in the latter that cooks your food unevenly.

The Oven Does not Self-Clean

The self-clean feature in your Oven helps to avoid the buildup of toxic fumes that the Oven may emit when you use aerosol cleaners.

Besides, this feature enables you to have an easy time during your oven cleaning routines. The Oven can automatically clean up itself as long as everything works in good condition.

When your furnace fails to self-clean, there could be many causes that you address to prevent them from persisting and expose you to danger.

Some of the reasons that your Oven does not self-clean include:

  • Faulty switch assembly and lock motor: the lock motor and switch assembly work together to keep the oven door closed during the cleanup cycle.

If the two are faulty, it gets impossible for the door to close after the cleanup cycle. If that happens, you experience difficulties whenever you need to open the oven door for the baking process.

You can, however, try opening the door by getting out some of its screws.

You must be sure to check your user manual before attempting to open the door by removing the screws.

  • A defective thermostat that controls temperatures in the Oven: during the cleanup cycle, the thermostat works with the heating circuit by sending voltage commands that control the amount of heat that stays in the Oven.

 If the thermostat is faulty, it gets difficult to complete the cleanup process. You may, however, notice that it still broils and bakes according to your preferences but fails to complete the cleanup cycle.

  • Damaged thermal fuse: if the thermal fuse is damaged, it cannot protect the Oven from overheating.

When the Oven starts to overheat, the thermal fuse always acts quickly by controlling the power supply to the Oven and thus, it shuts the Oven off and later shuts it on automatically to prevent any dangers and damages to your Oven.

If it fails to work, the entire clean- upcycle, as well as oven baking activities, cannot take place.

By using a multimeter, you can know if your thermostat has continuity. If it does not show any continuity, you may have to replace it as it is almost impossible to repair it.

  • Faulty door switch: during the self-clean upcycle, the oven door usually locks itself automatically. If the door switch is damaged, the door can’t close itself.

As a result, the cleaning up cannot happen as long as the door remains open.

A multimeter lets you know if the door switch has continuity or not. If it lacks continuity, you may have to replace it.

  • Temperature is too high: during the cleanup cycle process, you should not set high temperatures.

Your oven temperatures should be below 400 degrees Celsius.

When the interior of the Oven is too hot, you should be able to know and leave it for about 1 hour so that it may cool down and allow the door to close so that the cleanup process may begin.

Maytag Double oven Troubleshooting[amalinkspro type=”cta-btn-css” ctabtn-id=”” asin=”” apilink=”undefined” addtocart=”false” new-window=”true” nofollow=”true” alignment=”alignnone”]CHECK CURRENT PRICE[/amalinkspro]

Lack of ventilation

If you notice a lot of smoke in your Oven whenever you turn it on, this could suggest problems associated with low ventilation.

Besides, you may also smell a strong odor during maytag gemini double oven troubleshooting from the latter whenever you turn it on, and this is also another sign of low ventilation.

To eliminate these problems, you should be sure to turn on your oven ventilation to get rid of the unsafe smells.

It is essential for ovens to have a smell whenever you use them after purchasing them. The type of smell should not be an issue to you as it tends to go away with time.

If it does not go away, you should turn the cleanup cycle on and wait for the maytag gemini double oven troubleshooting process to complete.

Additionally, you should ensure that no leftover foods are soiling in the Oven as they tend to be dirty, and the mix up emits an odor that can be annoying to you.

Such odor can soak up in the food that you bake hence making it impossible for you to consume it.

To prevent the soil ups, be sure to take off food that drops in your Oven after it dries up and leaves the whole place free of food droppings.

Blocked Vent

The vent of your Oven is responsible for the good air circulation that happens in the unit.

The vent has a small hole that is mostly located beneath it, and the hole allows hot air to escape through it and later, it absorbs cool air that flows through the Oven for cooling purposes.

If the vent is blocked, there can be severe problems in your Oven, and they may lead to damage that you cannot repair.

Besides, maytag gemini double oven troubleshooting blocked vents usually cause uneven heat circulation in the Oven as the unit cannot balance the amount of heat leaving and entering in the Oven.

Blocked oven vents are mainly caused by food particles that remain in your Oven.

If you fail to clean up the Oven and get rid of such food particles, the Oven begins to strain, and if the food particles fall to the vent, they end up blocking it hence slowing its process of air regulation.

You should be alert on your vent to check for any particles that may be blocking it. You can easily remove the food particles as long as you use a hand ventilator to avoid getting burned.

Some of the causes of blocked oven vents can be debris and dust that the Oven absorbs from the air coming in from outside.

With god maintenance of your Oven, you can avoid the blockage of the vent hence making all activities efficient.

Besides, you should not treat all ovens equally as they differ depending on the manufacturer.

 Old ovens also tend to work differently compared to new ovens. The maytag gemini double oven troubleshooting setup process of old ovens is also, at some point, not as complicated as that of new ones.

The Oven does not emit heat to bake

Without heat in your Oven, it is impossible to kick start your baking endeavors. Many issues may lead your Oven unable to deliver heat for the baking process.

  • Lack of relays in the surface element board is one of the key causes of failures in your Oven. The device acts by regulating the supply of power to the burners.

If one of the burners is not working, one of the surface elements may be faulty. To confirm the level of damage to your elements, you should use a multimeter.

If the latter does not show any sign of continuity, it means that you cannot use the Oven anymore until you get to replace it.

  • Surface element switch may be defective: The surface element switch is vital in giving power to the element and other parts of the Oven.

 If the switch is not working and seems to be faulty, it cannot allow power to the surface element.

You can try to search for another switch of a similar element around the area and use its switch to supply power to the Oven.

If there is none, you should use a multimeter to check the state of the latter. If there is no definite response from the test, you can only replace the surface element.

  • Faulty coil surface element: the coil acts by connecting to the socket and working with other elements for power transfer to the rest of the oven elements.

 If the coil is damaged, it may never work again, and thus, you must replace it. A multimeter always works in letting you know the prevailing condition of your elements so that you can choose whether to replace them or not.

  • Wire kit and receptacle: the surface element is responsible for the provision of power and heat to the system.

It plugs into the receptacle to allow power to flow into the Oven, and thus, it is the critical point of power entry in the entire system. Without it, there is no power supply to the Oven.

The element serves by maintaining close contact with the power plugs and receptacles to provide continuous power to the system.

If there is no more power supply to your Oven, you should be sure to Maytag Double oven Troubleshooting check the contact between the receptacle and the plugs.

By inspecting the receptacle contacts, you get to see signs of damages like burnt plugs and worn-out elements.

If the two are still in contact, but they fail to supply the power to the Oven, it is not possible to repair them; hence you have to replace them.

  • Loose wire connection: the wires are mostly located near the heating element as it is the first power supply in the Oven.

If you keep track of a wire, you may find it close to the element. You can easily identify a burnt wire as mostly it appears black. Replacing the wires always helps.

There are vast problems that can cause failures in your Maytag Gemini Double Oven electric range.

You should always stay alert on the functioning of your Oven so that you can identify possible dangers before they get out of hand. Besides, high levels of hygiene are vital if you own an oven.

You can keep your Oven clean by removing food particles that fall off on its surface each time you finish baking.

Whenever you are using your Oven, you should ensure that it remains open since it is an electric one so that it can absorb cool air from the surroundings.

 A multimeter is an essential device you should have at your home as it helps you in your oven troubleshooting.

Your Oven can work just right if you maintain it well.


We're here to help you find the Best Bike Guides for your bike and lifestyle. Honest reviews, tricks and guides to help you find the best Bicycles and gears in the market. We compare the top products in different categories to give you the most reliable purchasing advice. Our goal is to make it easy for you to pick the best products and be confident in your decision.

Recent Posts